9/20/2011
11H | Rashad C. Collie
The Pinhole Camera
The Pinhole Camera
How to build a pinhole camera
Materials necessary: 1 . Leader
2 . Sturdy cardboard package
3. Dark-colored tape
four. Black newspaper
5. Dark-colored paint
six. No . twelve sewing needle
7. Craft knife
almost 8. Aluminum foil
9. Film or photo taking paper
Instructions: 1 . Make sure your container is light-proof and allows no light leaks. Hide any openings, cracks or perhaps crevices with black strapping, but keep an opening for example a flap to insert and remove film. Boxes ought to be made of tough cardboard or stiff conventional paper, and lids and flaps should close securely. 2 . Black out the camera. Series the inside of the box with black paper to prevent glare and to control unwanted light filtering through. Preventing light seepage is important, as the sunshine you do allow in to the camera should be very controlled. three or more. Cut a ¼-inch gap opposite the box opening having a craft cutting knife. Make the pinhole by puncturing a number 12 sewing filling device through a little square of aluminum foil measuring regarding 3-by-2 inches, rotating the needle whenever you push that through. Prevent pushing the needle through when it is midway in. Strapping the foil over the ¼-inch hole inside the box. Kodak recommends positioning the pinhole 3 to six inches via where the film will be put. 4. Make the shutter by taping some opaque black paper within the pinhole. You can create a shutter release from solid wood or plastic material by screwing it upon the body so that it covers the pinhole totally when not in use. 5. Weight the film into the box in a totally darkened room. Use a small square of photographic paper or linen film like Kodak Tri-X Pan Specialist Film. A standard box bigger than 3-by-4 inches wide will need film or conventional paper that steps about 2¼-by-3¼ inches; just cut to size. Weight the film so...
